The Hondata 4-port boost control solenoid allows Hondata equipped ECU's to control boost levels through the Hondata software. Using the 4 port solenoid instead of the older style 3 port solenoid provides better boost control on both high and low boost applications. This is achieved by controlling pressure to both the top and bottom side of the wastegate. This allows better low boost level control without sacrificing high boost control.
Advantages of the 4 port vs. 3 port boost solenoid:
- Better spooling for increased mid-range power
- More accurate duty cycle control
As with the standard Hondata boost control solenoid, the solenoid is normally closed so that if it were to ever fail you will run off the wastegate spring and not over-boost and damage your engine.
- Hondata S300 (with a PWM equipped ECU)
- Hondata K-Pro
- Hondata FlashPro
- 150mm (5.9")
- 90mm (3.5")
- 40mm (1.6")
- Dimensional Weight
- 0.11kg (0.24lb)
- Actual Weight
- 0.15kg (0.32lb)
All weights/dimensions have been checked and confirmed by our warehouse team. This part is eligible for international express air freight shipping.