Engine & Gearbox what parts are needed to do a k20 swap

Discussion in 'Honda K-Series' started by Ricky_Mitchell, Wednesday 30th Dec, 2009.

  1. Ricky_Mitchell Senior Member ★ ★ ☆ ☆ ☆

    387
    the EK is running a d14 at the min. i am hoping to start to do a k20 swop soon. for the summer. i have been looking into it. just wonna compare my needed parts list to other peoples.


    Thanks
     
  2. Bong Guest

    The part where the "O" should be an "A"
     
  3. Kadir Club Veteran ★ ★ ★ ★ ★

    Google Hybrid Racing. Their website is more than comprehensive.
     
  4. Performancetek Club Veteran ★ ★ ★ ★ ★

    At least 5 thousand (if doing it yourself) for a good swap is the main thing thats needed.
     
  5. Kadir Club Veteran ★ ★ ★ ★ ★

    Yes, Gerry is right.. At least
     
  6. Ricky_Mitchell Senior Member ★ ★ ☆ ☆ ☆

    387
    money isnt a problem. just wanted a list of parts
     
  7. Ricky_Mitchell Senior Member ★ ★ ☆ ☆ ☆

    387
    cheers matey
     
  8. Smiley Club Veteran ★ ★ ★ ★ ★

    This man speaks the truth. They have awesome knowledge. And sell all the parts. Although you can get certain parts cheaper else where. But my advice is read the info. Take it in then search for what you want. But buy only what you need to get the engine in and up and running. You can add bling or go for more power at a later date.
     
  9. Ricky_Mitchell Senior Member ★ ★ ☆ ☆ ☆

    387
    Very trure mate Thats what am looking to do.
     
  10. Performancetek Club Veteran ★ ★ ★ ★ ★

    for a BASIC swap, what youll need is ;


    -K20A2 engine and box, with all ancilliries, engine loom and section of dash loom


    -EP3 and B series shafts


    -K swap mount kit (hasport or f*ck all IMO)


    -DC5 shifter box and linkages


    -Mounting plate for above (from tegiwa)


    -Immobiliser bypass


    -Clutch line (
     
  11. al9955 Club Veteran ★ ★ ★ ★ ★

    4,590
    31
    a bit off thread, but gerry have you had any expreiences with the HR shifter box?, i know its a very new product, but just wondered if you tried one out in a k swap yet?


    al9955
     
  12. haggis Club Veteran ★ ★ ★ ★ ★

    i liked that one that popped up recently that had adapted the EP3 shifter assembly....is that a lot more difficult to do?


    i'll try n find a pic of what i mean
     
  13. al9955 Club Veteran ★ ★ ★ ★ ★

    4,590
    31
    are you on about the guy that fitted the EP3 setup into the dash of his EG?


    al9955
     
  14. haggis Club Veteran ★ ★ ★ ★ ★

    aye, the very same....couldn't find the pic cos "EP3" is too short a term to search so searching "EP3 Shifter" shows up about 9billion results :lol:
     
  15. Jasonday2007 Club Veteran ★ ★ ★ ★ ★

    K20A2 w/ gearbox


    Hondata wideband kpro (ECU)


    R crew racing header


    full exchaust system


    intake manifold


    Air intake / ait filter


    Clutch


    flywheel


    aftermarket fuel rail


    braided fuel lines


    braided clutch line


    pnp harness


    radiator


    Slim line fan


    Custom radiator hose


    fuel pressure regulator


    Hasport/hybrid engine mounts


    shifter


    k20/EG shifter mounting kit


    fuel pump


    DC5 drive shafts or other suitable


    hope that helps, borrowed and tweaked abit :Tongue:
     
  16. Shaggy EK4 Club Veteran ★ ★ ★ ★ ★

    how much can you usually pick one of these engine/boxes up for roughly?
     
  17. Kadir Club Veteran ★ ★ ★ ★ ★

    K20A2 EP3 engine and gearbox prices, I am guessing may start from around the
     
  18. chelt_scene Club Veteran ★ ★ ★ ★ ★

    speak to si vti hes done it
     
  19. Shaggy EK4 Club Veteran ★ ★ ★ ★ ★

     
  20. Kadir Club Veteran ★ ★ ★ ★ ★

    All the other swap parts required mean that a fair amount of funds are needed..