Found Version 4 Wanted List

Discussion in 'Parts & Accessories' started by Civic92, Friday 14th Jun, 2013.

  1. Civic92 Club Veteran ★ ★ ★ ★ ★

    I'm starting this topic so I don't have to make a million and one topics for parts.  I'll list everything I've got planned here but it doesn't mean I wanted everything now.  I will bump this topic and update as and when parts are required. 

    Highlighted parts are the ones I'll be after in the current period.

    The rest can wait

    EG Front Lower Control Arms (With ARB holes) - Cheap as possible, as long as they're straight and true the bushes can be in any condition at all.

    A recommended place to get everything (suspension wise) sand blasted and powder coated

    DC2 Front and Rear Anti Roll Bars - As long as it's straight and true I don't mind about worn bushes or rust.  They'll need all brackets and bolts included for fitting.

    Complete Hard Race bushing Kit

    Function 7 Rear Subframe Brace

    Function 7 Rear Lower Control Arms - JDM EG/DC2 Fitment

    Front and Rear Camber Kits

    Rear Calipers & Carriers - To bolt to 96 spec ITR hubs. 

    MeisterR Brake Conversion

    1" Master Cylinder & Servo

    DC2 Front Subframe & Steering Rack - Everything needed to fit to an EG.

    A set of 4x114 LIGHTWEIGHT alloys with enough clearance to fit the NSX calipers

    Spoon Lowering Springs for DC2 shocks
    Last edited by a moderator: Tuesday 25th Jun, 2013
  2. Stu. Club Veteran ★ ★ ★ ★ ★

    Will be taking my sa3rs off soon if they're lightweight enough?
  3. Civic92 Club Veteran ★ ★ ★ ★ ★

    Oh Stu.  Yes  Yes they would but they're not in my current list.  They'll be one of the last things I buy before getting a shell I think.
  4. Stu. Club Veteran ★ ★ ★ ★ ★

    Ah yeah, just noticed the bit in giant green text that explains that.. :whistle:
  5. Civic92 Club Veteran ★ ★ ★ ★ ★

    Haha it was there before but not big and bold. :Wink:   I just edited it to make it more visible.
  6. lance08 Club Veteran ★ ★ ★ ★ ★

    Got Regas 4x114 :Smile: 16" so will clear without a problem.
  7. ronildo Senior Member ★ ★ ☆ ☆ ☆

    I've got a asr brace with ITR roll bar for EK & adjustable end links if needed and 1inch brake mc & servo.
    Last edited by a moderator: Saturday 15th Jun, 2013
  8. Dan Club Veteran ★ ★ ★ ★ ★

    United Kingdom Dan Oldbury
    I have some front arms, i have two sets infact.

    I also have an EG VTi subframe with brace etc complete if thats any use to you at all either. You know the deal on payments too!
  9. Civic92 Club Veteran ★ ★ ★ ★ ★

    Dan I'll text you soon :Wink:
  10. Civic92 Club Veteran ★ ★ ★ ★ ★

    Front LCAs sorted (Cheers Dan)

    242mm Rear Calipers up next

    (Or cheap ITR ARBs /Steering Rack)
  11. i-vtec Valued Contributor ★ ★ ★ ☆ ☆

    Pm me list of parts that need shot blasting and powder coating.

    If you have a picture send that too.

    Ill get you price from the supplier I use.

    They done a good job on my cusco springs.
    Last edited by a moderator: Tuesday 25th Jun, 2013
  12. Civic92 Club Veteran ★ ★ ★ ★ ★

    Anyone got any rear 240mm calipers and carriers please