Engine & Gearbox terraclean

Discussion in '7th Generation (2003-2008) [Acura TSX]' started by declanswan, Thursday 12th Jul, 2012.

  1. declanswan Club Member ★ ☆ ☆ ☆ ☆

    What are peoples thoughts on this. CJ, anything delicate you can think of that it could harm ?
     
  2. Ichiban Club Veteran ★ ★ ★ ★ ★

    England CJ Leeds
    31,958
    8,340
    583
    Never heard of it bud until today :Unknown:I personally dislike television personality endorsing products. if you are concerned about carbon use super grade fuels and the best oil money can buy with regular oil changes. You will NEVER need to use products like these ever, they are more inclined to neglected cars and car which have very poor service histories.

    Lastly you don't want all the carbon in your engine removed , it creates more issues than its worth.
     
    Loading...
  3. SayamaAccord Club Veteran ★ ★ ★ ★ ★

    United Kingdom Cliff County Durham
    1,988
    125
    Do you recommend an additive for cleaning the fuel system though CJ....?
     
  4. Ichiban Club Veteran ★ ★ ★ ★ ★

    England CJ Leeds
    31,958
    8,340
    583
    Fuel additives get burnt along with during combustion process and won't be half aggressive as a de-carbonise will it?
     
    Loading...
  5. SayamaAccord Club Veteran ★ ★ ★ ★ ★

    United Kingdom Cliff County Durham
    1,988
    125
    I see Terraclean are rapidly developing a network of service centres...some may see that as an opportunity :Wink:
     
  6. Ichiban Club Veteran ★ ★ ★ ★ ★

    England CJ Leeds
    31,958
    8,340
    583
    Leaving more punters to believe they need it, or get convinced otherwise.
     
    Loading...
  7. SayamaAccord Club Veteran ★ ★ ★ ★ ★

    United Kingdom Cliff County Durham
    1,988
    125
    Mine runs better after Forte Gas Treatment treatment.
     
  8. Ichiban Club Veteran ★ ★ ★ ★ ★

    England CJ Leeds
    31,958
    8,340
    583
    Do you use normal petrol then?
     
    Loading...
  9. SayamaAccord Club Veteran ★ ★ ★ ★ ★

    United Kingdom Cliff County Durham
    1,988
    125
    Yup always use 95.
     
  10. Ichiban Club Veteran ★ ★ ★ ★ ★

    England CJ Leeds
    31,958
    8,340
    583
    There you have it ERG plate from Helen car was not bad even after 100K miles ran on VPP. Helen car has had two fuel treatments just for the sake of testing a products.
     
    Loading...
  11. Primarycare Club Veteran ★ ★ ★ ★ ★

    United Kingdom Primary c Northampton
    1,172
    289
    I have used BG products in bikes before with very good results.

    My ZZR6 stood for about 3 and a half years with the same fuel in it ( I know drain the carbs before storage) and the carbs were a mess when I came to take her for a blast this year. She was missing and would not pull 60 mph in any gear.. I mixed a gallon of fresh petrol and half a can of BG44k and took her out for a very embarrassing run. Took about 15 ish miles to clear the carbs enough to get over a spluttery 100 out of her. After about 40 ish miles it was running faultlessly had a smooth 150 out of her on the run back home:Whistle:.. Oh happy days

    Not tried diesel treatments before but was thinking of getting some Tunap from HH? Any views anyone on their products as never come accross them before


    .
     
    Loading...
  12. Ichiban Club Veteran ★ ★ ★ ★ ★

    England CJ Leeds
    31,958
    8,340
    583
    Tunap is kerosene free BG used to be but it isnt anymore.Tunap is cheaper too :Wink:

    When I put my first gen away for the winter I fill the tank up and add the entire bottle of Silkolene PRO FST Fuel System Treatment.

     
    Loading...
  13. SayamaAccord Club Veteran ★ ★ ★ ★ ★

    United Kingdom Cliff County Durham
    1,988
    125
    95 and Forte twice a year and no EGR or idling issues at all on my 6th Generation after 140k...only used Shell or BP fuel never supermarket...so I think these system cleaners are worth using as long as it's a good cleaner...fingers crossed doing that will keep the 7th Generation trouble free too.
     
  14. Primarycare Club Veteran ★ ★ ★ ★ ★

    United Kingdom Primary c Northampton
    1,172
    289
    I think I am going to try some of the Tunap, approved by Honda and I trust their judgment, if it didnt work I don't think they would promote it.. The car runs sweet and want to keep it that way, so thanks to Mr Eastwood for the advice and (first 25L came today) help I am stocking up on 0 - 30 and will have the first change this weekend. Regular changes and perhaps run some fuel treatment through the old girl every few month ans she should fine. Thats the plan..
     
    Loading...
  15. Ichiban Club Veteran ★ ★ ★ ★ ★

    England CJ Leeds
    31,958
    8,340
    583
    7th Generation Petrol engine with high mileage do develop idling issues ,infact IIRC at 100mile service it does say you need to do an idle learn. It is not a fault but a routine maintenance which needs to be performed for the sensors to get recalibrated.

    I have started to notice on my 7th Generation when you come back after a long journey and quickly get out of the car you can hear clicking under the bonnet.

    To some it may sound like the starter solenoid trying to engage and disengage the stator in the starter motor. Infact that's the DBW electronics recalibrating the throttle butterfly :Thumbup: So don't get worried if you hear that sound.
     
    Loading...
  16. declanswan Club Member ★ ☆ ☆ ☆ ☆

    Thanks for the advise. Think ill give it a miss !!!
     
  17. Ichiban Club Veteran ★ ★ ★ ★ ★

    England CJ Leeds
    31,958
    8,340
    583
    if you are planning to do a engine rebuild and you want parts to be cleaner before you strip it down , I would recommend this product.
     
    Loading...
  18. Doc Club Veteran ★ ★ ★ ★ ★

    Matt Peterborough
    1,157
    202
    1
    Why? Would this advice apply more to high mileage engines?
     
    Loading...
  19. Ichiban Club Veteran ★ ★ ★ ★ ★

    England CJ Leeds
    31,958
    8,340
    583
    An learned old Japanese R&D engineer told me as the engine wears the matching surfaces get a lining of carbon. It is these microns of metal wear where carbon builds up, and be easily dislodged by oil treatments, engine flush and decarbonising . This is happens on piston ring skirts,journals and valve seats valve guides.

    For example the piston rings if the carbon has been dislodged, the worn piston rings and the scraper oil ring will start to pick up oil into the combustion chamber and burn it. This oil will foul the plugs foul the cat , foul the 02 sensors.

    If you want to take the challenge get a CTR or ATR with 100K miles do this treatment and then trash the engine on a track you will see smoke billowing out the the exhaust.
     
    Loading...
  20. Doc Club Veteran ★ ★ ★ ★ ★

    Matt Peterborough
    1,157
    202
    1
    I thought it might be something like that, the carbon filling the pits in the metal surfaces maintaining performance, but I wasn't aware the carbon build up caused damage as well.

    If this treatment was used every 30k miles so the carbon deposits weren't allowed to build up as much, would the engine wear less, more, or the same over time? and would the performance be maintained for longer or would it be reduced earlier?

    I'm wondering if used early and regularly in the life of an engine this would be a good preventative for long term internal wear.
     
    Loading...