General Noise when turning engine on

When turning engine on in my garage (15-30% inclination upwards), with the start button, occasionally, momentarily there is a high pitch grinding noise . Is this normal?? What can this be?? Hope one can assist. CR-V 2013 auto 2.0l petrol.

 

Can try. Meanwhile if there is/are similar cases would be happy to get some information on this issue and maybe steps for resolving this. Maybe a service bulletin if one exists???

 

Honda TSB Number:A09-010.V5
Date:Feb 25, 2017
Failing Component: Engine (Pws)
Summary: Service bulletin - replace the VTC actuator if the engine rattles loudly for 2 seconds during cold start-up.

?? Revised pdf to version 5 - latest
Here is the pdf in case there is the respective European one.

 

Thanks. No I don't but it would be helpful for all 2013 CR-V European owners.

 

Will change first the external ATF filter and ATF just in case my problem is related to clogged ATF filter before proceding to the above. (ATF was already done so I might only do the filter, need to check history)

Revised the USA pdf to version 5 above. Hope someone can upload the respective European SB.

 

Reason see bulletin below. Don't believe this is either, what you said but will do it anyway. Both related to cold start noise.

 

Nice thanks. Probably will flush pipelines from external filter with air.

 

How much oil remaining?? Probably will use magnefine filter for the first 15000km and then change that to OEM just a thought.

Have 2 originals at home. One plastic and the newer with metal casing.

 

hope all gets sroted buddy keep us posted im intrigued on this one as im sure speedygee is as well

 

Noise in summer disappeared. Purchased Honda transmission oil for my next service. Filter was already discussed.