newby, glasgow

Discussion in 'Introduce Yourself' started by bucketep91, Thursday 31st Dec, 2009.

  1. bucketep91 Club Member ★ ☆ ☆ ☆ ☆

    hi every1 im charlie from glasgow, own a white glanza V. i know its not a Civic lol but im thinking of buying an EG Civic too.

    heres some pics of the glanza





  2. Shib786 Top Contributor ★ ★ ★ ★ ☆

    Wooot, hey!, what sort of power you running with it?/
  3. bucketep91 Club Member ★ ☆ ☆ ☆ ☆

    in the summer i had it on the rollers and it made less than standard surprisingly, since then i got the finger and the wallet out.

    its now running a Tongs GTspecB hybrid turbo with hks actuator at 1bar

    hdi-r ebc

    speedvision s/s mani

    autobahn decat

    apexi n1 cat back system

    japspeed fmic


    GReddy bcc

    lowered on shocks and springs 60mm

    cusco style bmcs

    bcc and fpr was set up on the rollers last week but an i/c pipe kept poping off when we upped the boost so it couldn't be set up properly but it was pulling 160atw. iv since been looking for a new hot side i/c pipe route before i get it mapped in january with either a dastek uni chip i have or buy emanage blue and have it mapped on that

    i also sold those 14" sparco wheels its got a set of 15" gunmetal slipstreams with a polished lip on it now

    will put some more recent pics up and of engine bay after iv givin it a clean lol
  4. eca Valued Contributor ★ ★ ★ ☆ ☆

    swish. welcome to the site dude
  5. bucketep91 Club Member ★ ☆ ☆ ☆ ☆

  6. haggis Club Veteran ★ ★ ★ ★ ★

    welcome along bud....think i've seen that wee glanza about glasgow...looks tidy :Smile:

    lookin for an EG for a project or WOT?
  7. bucketep91 Club Member ★ ☆ ☆ ☆ ☆

    aye just for a project. ill see what comes up, not looking for a minter just somthing to play with. i don't think i could sell my starlet after all the work iv put into it
  8. Jsin Senior Member ★ ★ ☆ ☆ ☆

    welcom man im from g-town to :Smile: my Civics a shitter tho lol.
  9. bucketep91 Club Member ★ ☆ ☆ ☆ ☆

    lol wer in glasgow u from matey?
  10. Gary. Club Veteran ★ ★ ★ ★ ★

    Im positive I've seen this kicking about, are you ever in Paisley?
  11. bucketep91 Club Member ★ ☆ ☆ ☆ ☆

    aye i work in paisley a lot
  12. Ross. Club Veteran ★ ★ ★ ★ ★

    yasssssssss moan the paisley, don't suppose you know steven pringle? lol
  13. kev_vtec Club Member ★ ☆ ☆ ☆ ☆

    nice car mate. love the red carpet
  14. bucketep91 Club Member ★ ☆ ☆ ☆ ☆

    never heard of him m8

    yeah i done the carpet myself im a floorlayer to trade. points for whoever guesses where i got that idea lol
  15. Ross. Club Veteran ★ ★ ★ ★ ★

    You got any pics of it how it stands now? With the different alloys?
  16. bucketep91 Club Member ★ ☆ ☆ ☆ ☆

    just got this 1 from my fne. excuse how dirty the car is lol

  17. Ross. Club Veteran ★ ★ ★ ★ ★

    Looks good. Likin that EP in the back aswell.
  18. bucketep91 Club Member ★ ☆ ☆ ☆ ☆

    yeah thats my nieghbour dannys. The starlet eats that for breakfast every morning lol * waits to get slaughtered*
  19. kev_vtec Club Member ★ ☆ ☆ ☆ ☆

    im putting red carpet in the CR-X at the min.

    any tips :Wink:
  20. bucketep91 Club Member ★ ☆ ☆ ☆ ☆

    don't eat yellow snow lol

    only jokin m8, where u from?

    what type of carpet are u using, i got stuff made for boats as it was easy to shape into the shape of the floorpan and hard waring. best way to do it is in sections ie, front footwells seperate that way if they get dirty or worn u can replace it easier, then the rear floor next thats the hardest part trying to shape it then u do the bit going up to the rear bench seperate too and use a good glue, i used a strong spray adhesive. its not easy lol took me a couple of hours and thats what i do for a living lol

    this is when i first did it with the old seats in