Lambda sensor

Discussion in '6th Generation (1996-2000)' started by shawthing001, Monday 28th Dec, 2009.

  1. shawthing001 Club Veteran ★ ★ ★ ★ ★

    Changing exhausts and need to unplug the sensor from the car as its to hard to try and disconnect from the car underneath the car on the ground. So basicly where abouts in the car the does lambda sensor go too?
     
  2. Naj_Ej Club Veteran ★ ★ ★ ★ ★

    it would be connectd to the manifold.
     
  3. shawthing001 Club Veteran ★ ★ ★ ★ ★

    Lol I know that. I worded it wrong, from the cat where about does it go to (under the dash or in the engine bay)
     
  4. jetblack Club Member ★ ☆ ☆ ☆ ☆

    Its got a connector block, just un plug it...
     
  5. jayp Valued Contributor ★ ★ ★ ☆ ☆

    the connectors in the engine bay, it shouldn't be too hard to follow the wiring back.
     
  6. good at crashing Club Member ★ ☆ ☆ ☆ ☆

    40
    Be careful, the connector block is connected to a steel bracket, which is connected to the engine block. You need to remove the grey connector block from the bracket first.
     
  7. carlsberg Club Veteran ★ ★ ★ ★ ★

    and its not in the cat so theres no point in actually removing it, its in the manifold