Kw coilovers - eg - ej???

Discussion in '5th Generation (1992-1995)' started by James91, Monday 30th Nov, 2009.

  1. James91 Club Member ★ ☆ ☆ ☆ ☆

    211
    Hey recently crashed my silver EG (green rotas) and iv taken the coilovers off and im wondering if they will fit a 2000 ej9? as thats what im looking into next
     
  2. Porker New Member Getting Started

    Yes. With spacers...
     
  3. James91 Club Member ★ ☆ ☆ ☆ ☆

    211
    where do the spacers fit exactly ? is it going to be a bastard or should i just find someone for swapsies?
     
  4. seanyreeves Club Veteran ★ ★ ★ ★ ★

    the spacers go on the rear suspension, inbtween the fork bit and your suspension bush
     
  5. James91 Club Member ★ ☆ ☆ ☆ ☆

    211
    ahh right cool! so no fucking about at the front with the camber arms or anything? if its just spacers on the bushes thats no issue
     
  6. Porker New Member Getting Started

    Yesh that's the only place they're needed...
     
  7. James91 Club Member ★ ☆ ☆ ☆ ☆

    211
    Thanks guys!! much apriciated 1 more little question where can i cet some from when i get an EJ? :Grin:
     
  8. Bon Club Veteran ★ ★ ★ ★ ★

    A bunch of chunky washers will do just fine, just pop into your local bolt store, or check ebay even...
     
  9. James91 Club Member ★ ☆ ☆ ☆ ☆

    211
    cheers bon! :Smile: (y)
     
  10. MeisterR Commercial Services Trader

    2,726
    17
    in case you need to know the size, it is about 10mm difference.


    So you would need 2x 3mm-5mm washers/spacers.


    And if you need to get a new bolt while you are at it, you need a M10 80mm bolt with a lock nut. :Smile:
     
  11. James91 Club Member ★ ☆ ☆ ☆ ☆

    211
    Cheers man! now i no what im dealing with i can keep my kw varient 1s :Smile:


    Thanks for everyones help!!!!