Engine & Gearbox h22a7 in eg mounts issue.

Discussion in 'Honda F/H-Series' started by Afy, Wednesday 23rd Jul, 2014.

  1. Afy Club Veteran ★ ★ ★ ★ ★

    I have a mount kit, the innovative 29550.

    All mounts line up apart from the timing side mount.

    Any help. Please
  2. Dean Collier Valued Contributor ★ ★ ★ ☆ ☆

    me and ash had a similar problem when putting his engine in just had to loosen the mounts off so u get abit off movement then wiggle the engine about was a nightmare think that was using a qsd kit with b series mounts
  3. Afy Club Veteran ★ ★ ★ ★ ★

    Sliding it in that's what I'll be doing.

    But one if the h22a7 bracket studs... ones an inch out.

    I'm thinking I need a Prelude engine bracket on timing belt side.
  4. Dean Collier Valued Contributor ★ ★ ★ ☆ ☆

    on the kit we used it comes with a new bracket that bolts onto the engine then we used a b series mount from a DC2 with 3 holes don't no if ur using the same kit
  5. Afy Club Veteran ★ ★ ★ ★ ★

    Mark aka sonic on here

    Has been really helpful

    He has shown me pics of the braket you are on about.

    Sadly the innovative comes with 3 mounts and a bracket for the h series gear box.

    It does not come with a engine bracket.

    Might talk to the guys I got it from.
  6. Dean Collier Valued Contributor ★ ★ ★ ☆ ☆

    are u doing a full h22 swap not h2b then
  7. Afy Club Veteran ★ ★ ★ ★ ★

    Yep full h22 swap.
  8. Dean Collier Valued Contributor ★ ★ ★ ☆ ☆

    in that case im not to sure WOT mounts are needed might be worth trying a Prelude mount do u have any pics off how it sits by any chance
  9. Afy Club Veteran ★ ★ ★ ★ ★

    I got an idea of what I need.

    I'll take pics tomorrow.

    I thought h22a7 in EG uusing innotive mounts would be a common swap.