Engine & Gearbox H22 into EG

Discussion in 'Honda F/H-Series' started by Law, Tuesday 25th Nov, 2014.

  1. Law Club Veteran ★ ★ ★ ★ ★

    Stupid search function shows 0 results for H22. Im sure.

    Anyway, anyone kept the H box (cable change) when swapping into an EG? Or EK if its similar.
  2. dogg1210 Valued Contributor ★ ★ ★ ☆ ☆

    Mines has the cable h box in my EK coupe

    Mines has the cable h box in my EK coupe
  3. Law Club Veteran ★ ★ ★ ★ ★

    Did you do the swap yourself?
  4. dogg1210 Valued Contributor ★ ★ ★ ☆ ☆

    NA mate performance tek Glasgow did it from what I can see it looks as if the old shifter box was taking out and then the space was cut for the h shifter
  5. spennyd Top Contributor ★ ★ ★ ★ ☆

    Are you on Facebook law?
  6. Law Club Veteran ★ ★ ★ ★ ★

    Yeah man. Whys that?
  7. spennyd Top Contributor ★ ★ ★ ★ ☆

    Go check out our page backyard Civics

    Marks time attack Civic is h22. He will answer any questions you have. :Smile:
  8. SiR_Chris Senior Member ★ ★ ☆ ☆ ☆

    Honda-tech have lots of threads on this with pics, if that helps bud
  9. EGH_22 Club Veteran ★ ★ ★ ★ ★

    Last edited by a moderator: Wednesday 26th Nov, 2014
  10. Law Club Veteran ★ ★ ★ ★ ★

    Yeah, I've already read that :Smile:

    I need to know if the Prelude and accord cables are the same.
  11. EGH_22 Club Veteran ★ ★ ★ ★ ★

    Oh, yea cables are the same. U can also use the k20 cables too
  12. wayneR Valued Contributor ★ ★ ★ ☆ ☆

    I'm thinking of pulling my B16 out the EG but i'm very wary of wiring modding  which i know needs doing.

    I've done the research but it's like reading jap and over my head :Frown:
  13. EGH_22 Club Veteran ★ ★ ★ ★ ★

    Its only a 4 of wires that need extending.

    alternator wiring (it's on the front of the engine instead of the back),

    IAT sensor

    oil pressure

    fan switch.

    If you was to do it, be easier to go h2b though wayne as you got the b series gearbox, sell the b16 and you'll be able to get a decent h22 with it.
  14. EGH_22 Club Veteran ★ ★ ★ ★ ★

  15. newbs Top Contributor ★ ★ ★ ★ ☆

    ^^^^ did you sell ya set up in the end
  16. wayneR Valued Contributor ★ ★ ★ ☆ ☆

    Did u use the EG engine loom ?

    Did u use a resistor box for the injectors ?
    Last edited by a moderator: Wednesday 26th Nov, 2014
  17. EGH_22 Club Veteran ★ ★ ★ ★ ★

    No I've still got it mate

    Havent used it as much took my boy in it and he loved it lol. Just a few lil things need doing to have it running properly.

    I used the b16 loom you can use the d16 but as i had the b16 in there used that instead yes im using the resistor box as im running the 345cc injectors if you get a different h22 they come with different injectors that don't need a resistor box to work.
  18. dogg1210 Valued Contributor ★ ★ ★ ☆ ☆

    Handy to know as I think I need new cables