Engine & Gearbox H22 and boost

Discussion in 'Honda F/H-Series' started by Law, Tuesday 25th Nov, 2014.

  1. Law Club Veteran ★ ★ ★ ★ ★

    Anyone know much about them?


    Primarily....whats the weak point? Research seems to point towards ringlands, but anything else?
     
  2. newbs Top Contributor ★ ★ ★ ★ ☆

    my m8 got a 450 soon to be 500hp 1 in is teggy,,aperently he recommened sleeves as the h22 sleeves are weak

    & will need good shafts as they will go thru shafts easy...very torquy engine..just uprated is to 1000bhp rated 1s
     
    Last edited by a moderator: Tuesday 25th Nov, 2014
  3. Law Club Veteran ★ ★ ★ ★ ★

    Its not the sleeves that are weak. They are FRM and will be fine up to 500whp or so.
     
  4. newbs Top Contributor ★ ★ ★ ★ ☆

    He done is as he easily cracked 1..and that wasnt even on high boost..but apart frm that there underated blocks n go really well with boost & wouldn't change it for a b or k


    you thinking h22 boost in the EG
     
  5. Law Club Veteran ★ ★ ★ ★ ★

    That's the plan :Smile:
     
  6. newbs Top Contributor ★ ★ ★ ★ ☆

    Gd choice :Smile: got bored off the d?...if you want any info on it pm me...I can get info off my m8..as his as been tried n tested n be running 500 when he goes bk to rdt
     
  7. Law Club Veteran ★ ★ ★ ★ ★

    Just time for a change. This is the 3rd boosted D I've run in this chassis so on to something different.
     
    Last edited by a moderator: Wednesday 26th Nov, 2014
  8. newbs Top Contributor ★ ★ ★ ★ ☆

    Let me know how you get on...I wanted to do h2b swap into mine...only dwnfall is they dnt rev to high...so about 8k maybe 8.2 but they make loads off power from low any way
     
  9. Law Club Veteran ★ ★ ★ ★ ★

    That's not a bad thing. Makes turbo choice easier.
     
  10. dogg1210 Valued Contributor ★ ★ ★ ☆ ☆

    Think you need sleeves if it's a h22a7
     
  11. Law Club Veteran ★ ★ ★ ★ ★

    Stock sleeves will see 500bhp on an A7


    However, they are only as good as the tune.
     
  12. newbs Top Contributor ★ ★ ★ ★ ☆

    Gt35 you thinking?
     
  13. Law Club Veteran ★ ★ ★ ★ ★

    No chance. GT30r with a 82 exhaust housing or something similar p
     
    Last edited by a moderator: Wednesday 26th Nov, 2014
  14. newbs Top Contributor ★ ★ ★ ★ ☆

    Should be a good build.... you looking on a a7 or a?
     
  15. dogg1210 Valued Contributor ★ ★ ★ ☆ ☆

    didnt think they could take that much
     
  16. newbs Top Contributor ★ ★ ★ ★ ☆

    My m8 went darton on is a7 as he sed they were weak as fuck... but as law said..could be done on right tuning
     
  17. Law Club Veteran ★ ★ ★ ★ ★

    A7


    The sleeves are the same as S2000. They take 600bhp totally stock.


    I know you can't really compare, but the material and construction is exactly the same.
     
  18. 4dvti Club Veteran ★ ★ ★ ★ ★

    Some years ago a CL member (unsure on username) had a stock h22 turbo EK/EJ. I think he was running high 11s- definitely hitting 12s. It'll be somewhere in the boosted setups thread.
     
  19. newbs Top Contributor ★ ★ ★ ★ ☆

    When you gonna start building law
     
  20. Law Club Veteran ★ ★ ★ ★ ★

    As soon as my stuff sells