Civic/5th Gen Eg6 Build up

Discussion in 'Project & Modification Logs' started by andy1max, Friday 19th Oct, 2007.

  1. andy1max Senior Member ★ ★ ☆ ☆ ☆

    Thought Id post a build of my EG. This is how it looked when i bought it

    eg6-1.

    eg6-4.

    There was lots of ICE in the boot aswell :Whistle:

    Although under the bonnet its got a BMC induction kit and a dc sports 4-2-1

    eg6-3.

    Needs a clean :Grin:

    So the first thing was to take all the stereo out

    Image0021.

    The rest of the rear interior will be coming out, but not till i get a new exhaust as this one sounds horrible ATM :Tongue:

    Also decide i wasnt keen on the mesh, so i changed it until i can get a new OEM bumper

    Image0031.

    Image006.

    I also gave it a wash today after putting the bumper back on and spraying the vti lip black

    Image0001.

    Next on the list is some 15's and a decent exhaust to replace the powerflow one

    Well abit more happened this week

    Picked up these from Danny

    Image0051.

    Need repainting though as i don't think the orange will look good on the red

    This is what one of them looks like as of this afternoon

    Image0022.

    Ghetto Slips :lol:

    Also recieved a parcel, well when i say recieved it was just left on my doorway, for anybody to take. Luckily it wasnt

    Image0011.

    Hmm what could it be, i was so excited i couldn't take the picture straight when i opened it :lol:

    Image007.

    Magnaflow exhaust to replace the crappy powerflow!

    Couple more bits waiting to go on

    DSC00021.

    Also got a lower tie bar to go on with them

    DSC00022.

    And my rocker I've been painting, still got to finish of scraping paint of the letters but not to bad for my first one :Grin:

    DSC00023.

    Also got a lightweight flywheel and exedy clutch waiting to go on

    Finally changed my lca's and put my tie bar on :Grin:

    undereg6.

    Also the addition of a spoon style spoiler

    DSC00108.

    DSC00101-1.

    DSC00104.

    DSC00107.

    DSC00110.

    DSC00113.

    DSC00140.

    De badged bonnet

    DSC00141.

    Some evo 4 recaros. Basically the same design as ITR with a pattern in the middle but much cheaper :Grin:

    DSC00163.

    DSC00164.
     
  2. Hydra Top Contributor ★ ★ ★ ★ ☆

    u'll b living in hell with the car lowered and lower tie bar loll
     
  3. dread Top Contributor ★ ★ ★ ★ ☆

    915
    whys that, i get on fine with mine and thats pretty loow..


    but if you wanna see looooooow, you should see my mates mx5 that thing is utterly ridiculous... the lower tie bar on that is about 20mm of the ground...
     
  4. Hydra Top Contributor ★ ★ ★ ★ ☆

    coz i hit my lowered tie bar all the time its plain scary
     
  5. Brookstyle Top Contributor ★ ★ ★ ★ ☆

    716
    Nice job, Another Civic saved from the grasp of chavism! Looks better with the mesh in black :Grin:
     
  6. dread Top Contributor ★ ★ ★ ★ ☆

    915
    for real?


    just ordered a h brace for mine today too :Messed:
     
  7. Hydra Top Contributor ★ ★ ★ ★ ☆

    well in london its a nightmare to live with, i assume it'll be even harsher if u live near hatfield around the herts uni campus. There are like a billion of speed bumps that'll b more than enought to destroy a lowered car with a tie bar lol....


    i think there's this road called the bishop's rise it is ridiculous.
     
  8. dread Top Contributor ★ ★ ★ ★ ☆

    915
    ok well its still about 20 miles from me, roads round my way are bad but not that bad... but in general herts is an arsehole...
     
  9. Hydra Top Contributor ★ ★ ★ ★ ☆

    yea man last time i went there shitloads of police there :Blink:~~ not good not good!!!
     
  10. N24NTY Senior Member ★ ★ ☆ ☆ ☆

    360
    This is JDMHatch of CSC yes?
     
  11. andy1max Senior Member ★ ★ ☆ ☆ ☆

    Update

    Managed to snap a driveshaft at Shakespear Raceway :Tongue:

    So was off the road for about a month while i did a few other bits

    http://s95.photobucket.com/albums/l154/andy1max/?action=view&current=civicpush.jpg

    DSC00189.

    Put an exedy clutch and lightweight flywheel on at the same time

    DSC00176.

    DSC00177.

    And put some Avo coilovers and 282mm front brakes off a donor Civic i bought

    novmeet2.

    Now very low, so much so i have to go a diferent route to work cause the exhaust scrapes on speedbumps :Angry:

    Anyway this is gonna be for sale after christmas so probably it for the Mods

    novmeet1.