eg hatch cat back exhaust on an ej coupe

Discussion in '5th Generation (1992-1995)' started by sohc, Monday 2nd Nov, 2009.

  1. sohc Club Member ★ ☆ ☆ ☆ ☆

    228
    what needs to be done, if anything, to fit an exhaust of an EG to an EJ? does it require lengthening etc?
     
  2. FrAz Senior Member ★ ★ ☆ ☆ ☆

    649
    EJ2's are slightly longer but im sure they can be modified to fit without a lot of hassle.
     
  3. Tom1989 Valued Contributor ★ ★ ★ ☆ ☆

    873
    Cut the bit that goes over the axle and weld in about 6". the b-pipes are the same, its the axle-back thats different.
     
  4. sohc Club Member ★ ☆ ☆ ☆ ☆

    228
    brill thanks :Smile: is it fairly cheap to have this done concidering its a 3 inch pipe?
     
  5. FrAz Senior Member ★ ★ ☆ ☆ ☆

    649
    take it to a exhaust fabrication company near you. they should be able to do it and i can't see it costin more than
     
  6. sohc Club Member ★ ☆ ☆ ☆ ☆

    228
  7. tony07 Top Contributor ★ ★ ★ ★ ☆

    atleat you know whats what now mate for DEF, let me know whn you want to collect it