Engine & Gearbox eg esi loom and eg6 loom

Discussion in '5th Generation (1992-1995)' started by Gsung, Monday 23rd Nov, 2009.

  1. Gsung Top Contributor ★ ★ ★ ★ ☆

    Is there any diffrence in these two looms at all ??
     
  2. import_trung Valued Contributor ★ ★ ★ ☆ ☆

    534
    engine loom or chassis loom?


    the engine loom, the difference is the map sensor wire on the eg6 is part of the chassis, whereas the eg5 map sensor wires are attached on the engine loom.
     
  3. Gsung Top Contributor ★ ★ ★ ★ ☆

    so if i was going to use a esi engine loom on a b16 would i just have to extend the map sensor wires.
     
  4. JDMJut Club Veteran ★ ★ ★ ★ ★

    You'd have to use a chassis loom with the map sensor on the bulkhead, or run the wire from the ECU to the esi loom yourself.


    You'll need to move the o2 sensor as well.