Eg coilovers on ef?

Discussion in '4th Generation (1988-1991)' started by James91, Saturday 5th Dec, 2009.

  1. James91 Club Member ★ ☆ ☆ ☆ ☆

    might be buying a ef later on today just wondering if my coilovers will fit :Smile: cheers!
  2. candyredvtec Top Contributor ★ ★ ★ ★ ☆

    they do go on,

    but i think you will need the EG forks

    for them to go on the ef
  3. jdmek Club Veteran ★ ★ ★ ★ ★

    United Kingdom Adam London
    you will need the EG front forks and may have to pack the back mounts out a bit with a shim.
  4. James91 Club Member ★ ☆ ☆ ☆ ☆

    thanks lads! didnt get it, it was rough as some IDIOT thought oh the bottom of the arches are a bit rusty ill weld a massive chunk of steel on both sides and pait it with a paint brush. still on the lookout tho! loving the simplness of the 1.4 duel carbs :Smile:
  5. vtec flex Top Contributor ★ ★ ★ ★ ☆

    yep we took eg6 coilovers and fitted them to a 2nd Generation CR-X vt and needed to use EG front forks :Smile:
  6. Arvid Junior Member ☆ ☆ ☆ ☆ ☆

    is it standing then much higher?? If You have coilovers You can adjust them, but will You be able to go really low (like -70mm to stock)? If the EG's fit then the DC2 should aswell...