Civic eg6 vti track car build

Discussion in 'Project & Modification Logs' started by deek1, Friday 12th May, 2017.

  1. deek1 New Member Getting Started

    United Kingdom deek cambridge
    Only just found this forum and thoufht i would post some.of my build thread and spec, i have had the car for a few years and been building it in various forms! The current build spec i will post below
    Saab b204
    Garrett gtx3071r gen2 turbo
    Syvecs s6 ECU
    Siemens deka 875 injectors
    Facet red top and bosch 044 fuel pumps
    Atl fuel cell
    Tial mvs 38 mm external gate
    Home made wrc style inlet
    Home made turbo manifold with home made 3" exhaust
    Toyota yaris coils
    EG buddy club front coil overs
    Yamaha r6 rear shocks and springs with push rods
    Drift works mx5 upper wishbones
    Mx5 lower wishbones all poly bushed
    Full weld in cage
    Home made transmission tunnel
    BMW e46 320d gear box Screenshot_2015-04-28-20-42-54. Screenshot_2015-06-08-20-54-49.
    Nissan 350z rear diff LSD
    Custom propshaft
    - - - Updated - - -
    i had pro race 1.2 custom made to my sizes and offset etc so the rears are 9x17 with 255/35/17 tyres and the fronts are 7x17 with i think 215/40/17 tyres
    the interior is fully stripped with a flocked dash and a dash2 clock set to replace the standard clocks

    while i know many may not like this as its not using a honda engine but i am a saab mechanic and i like the engine so was the obvious choice and just thought i would share for those who may be interested.

    Attached Files:

    DrSam likes this.