blowing

Discussion in '6th Generation (1996-2000)' started by civic121, Tuesday 29th Dec, 2009.

  1. civic121 Club Member ★ ☆ ☆ ☆ ☆

    96
    ma exhaust is blowing from were the backbox bolts on to the rest of exhaust can't weld it tried glue but not holding can anyone help
     
  2. Grovesy Senior Member ★ ★ ☆ ☆ ☆

    487
    Try that exhaust paste/gum shit, my mate had the same problem, smacked some of that on and it stopped it blowing. Can get it from all motor factors and that. Quick and easy fix IMO.
     
  3. haggis Club Veteran ★ ★ ★ ★ ★

    i think you've been sniffing that glue met
     
  4. Callum. Top Contributor ★ ★ ★ ★ ☆

    :eek:
     
  5. donzo Club Veteran ★ ★ ★ ★ ★

    Try a gasket ya spanner.
     
  6. Pneuma Club Veteran ★ ★ ★ ★ ★

    seriously....you used glue on your exhaust?
     
  7. Jasonday2007 Club Veteran ★ ★ ★ ★ ★

    my exhaust keeps blowing, but where the de-cat joins the manifold (yes there is a gasket)


    Got some of that paste to wack all over it :Tongue:
     
  8. donzo Club Veteran ★ ★ ★ ★ ★

    Yep normally need a bit of paste on the donut gaskets especially if they are old.
     
  9. d1nnx Valued Contributor ★ ★ ★ ☆ ☆

    577
    u can also put 2 gaskets in and use exhaust paste on it. Done the job 4 me boy
     
  10. kowalski Club Veteran ★ ★ ★ ★ ★

    james scotland
    +1 On the exhaust putty/paste. good bodge
     
  11. Bon Club Veteran ★ ★ ★ ★ ★

    Check your rubber hangers aswell mate, espcially the one by the rear driver side wheel, if thats missing or the rubber is stretched then it will blow like mine did. :Wink:
     
  12. Jasonday2007 Club Veteran ★ ★ ★ ★ ★

    i had the de-cat fabricated at the garage that fitted my HKS system for