Engine & Gearbox B18C4 ECU advice

Discussion in 'Honda B-Series' started by qasim, Tuesday 29th Dec, 2009.

  1. qasim Top Contributor ★ ★ ★ ★ ☆

    911
    right i have got a c4 engine and i need an ECU as the 1 i got with the engine came with no immboliser :Angry: so thats a no no.Just wanted to know if if i could use teg JDM P73 without any problems,or is it best getting a p28 with a c4 map


    Just need sme advice people


    thanks for reading
     
    Last edited by a moderator: Tuesday 29th Dec, 2009
  2. Smiley Club Veteran ★ ★ ★ ★ ★

    i don't think a p73 or the p28 comes with immobilsers either.


    ECU with immobilisers are scrap anyway, you need key, clocks and matching ECU from the same car for them to work
     
  3. qasim Top Contributor ★ ★ ★ ★ ☆

    911
    I think you can use the JDM teg ECU cos i dnt think the come immoblised,correct me if am wrong though .


    so smilley what do you think i should do
     
  4. .ku Club Veteran ★ ★ ★ ★ ★

    u can use p73 till u get it mapped with a 0bd1 ECU
     
  5. Smiley Club Veteran ★ ★ ★ ★ ★

    i'm confused now, do you want one with or without a immobiliser?


    either way i would use a p28, or p30 with a c4 base map on it, and then go have it live mapped.
     
  6. westy_b18 Senior Member ★ ★ ☆ ☆ ☆

    505
    i have a 98 spec p73 ECU that don't have the immobilizer on it aswell JDM :Grin:
     
  7. qasim Top Contributor ★ ★ ★ ★ ☆

    911
    basically i just need an ECU that will work with my engine.i got a p9k ECU with mine but i can't use that as i dnt have the keys or immobliser ring.


    i was just thinking if theirs 1 i could take off another car and use .
     
  8. Smiley Club Veteran ★ ★ ★ ★ ★

    thats what i though, but your first post read like you didnt want to use your ECU as it had no working immobiliser.


    anyway see my post above for what i'd do.
     
  9. qasim Top Contributor ★ ★ ★ ★ ☆

    911
    sorry for the confusion m8 .


    looks like the best thing would be to get it mapped on a p28 or p30.


    would it be ok to run a p73 or any other ECU temporarily until i get it live mapped


    PM coming your way westy :Smile: