The 2nd Generation Jazz does have a front facing Jacking bracket! It makes jacking and supporting the Jazz an easier task. The 3rd Generation is different have a look at How Lift and Support a Third Gen Jazz Safely
- Difficulty Level:
Frame Hoist or Four Post Lift
Hoisting the car on four post lift or resting the Axel stands.
NOTE: If you are going to remove heavy components such as suspension from the rear of the vehicle, first support the front of the vehicle with tall safety stands. When substantial weight is removed from the rear of the vehicle, the center of gravity can change and cause the vehicle to tip forward on the hoist.
- Position the hoist lift blocks (A), or safety stands, under the vehicle's front support points (B) and rear support points (C).
- Raise the vehicle a few inches, and rock the vehicle gently to be sure it is firmly supported.
- Raise the hoist to full height, and inspect the lift points for solid contact with the lift blocks.
- Block the rear wheels when raising the front of the vehicle; block the front wheels when raising the rear of the vehicle.
- Place the blocks behind and ahead of the wheels.
- Raise the vehicle high enough to insert the safety stands.
- Adjust and place the safety stands so the vehicle will be approximately level, then lower the vehicle onto them.
Jacking Up and Supporting Safely
Honda Jazz 01-08 [GD1-5, GE2-5]