This is one DIY which I enjoyed I took my time and ensured they were fitted correctly.
The box with the pedals, Made in Japan too Superb quality.
First remove the dead clutch rest , brake and clutch pedal rubbers.
Pulling gently on the dead clutch rest you can remove it easily
On the back you see the two buttons.
Taking the one in the sports pedal kit , a simple push in and firmly pushing into the two locators. The remaining bits to install:
On removing the two brake and clutch rubbers you can see the pilot holes pre drilled from the factory
Make the pedals up
Using the longer rivets and with a rivet gun install them .easy.
I placed a Microfibre cloth pedal the organ accelerator pedal ready for drilling. The cloth came in handy to catch all the rubber shards and ensures the light carpet isn't soiled accidentally.On the sport accelerator cover you will see a top lip and the current pedal has lip ensure this is seated correctly before you drill.
Then using a 3.5MM drill bit drill the holes. Measure repeatedly before you drill.
Once you have drilled the hole made sure you get all the rubber shards off the rear of the pedal cover,
Using the longer rivets slot them into the holes ensure all six are seated and aligned correctly. Once satisfied using the rivet gun snip the ends off.
A quick hover and clean up admire your beautiful pedals.
Genuine Sports Pedals Installation