Design Specifications

Jazz Hybrid 10 [GP1]

  1. Dom
    Design Specifications
    Item Measurement Qualification Specification
    DIMENSIONOverall length3,900 mm (153.5 in)
    Overall width1,695 mm (66.7 in)
    Overall height1,525 mm (60.0 in)
    Wheelbase2,500 mm (98.4 in)
    TrackFront1,490 mm (58.7 in)
    Rear1,475 mm (58.1 in)
    Seating capacityFive (5)
    ENGINETypeWater-cooled, 4-stroke SOHC i-VTEC engine
    Cylinder arrangementInline 4-cylinder, transverse
    Bore and stroke73 x 80 mm (2.87 x 3.15 in)
    Displacement1,339 cm 3 (82 cu in)
    Compression ratio10.5
    Valve trainChain drive, SOHC i-VTEC 2 valves per cylinder
    Lubrication systemForced, wet sump, with trochoid pump
    Fuel requiredUNLEADED petrol with 95
    Research Octane Number or higher
    STARTERTypeGear reduction
    Nominal output1.0 kW
    Hour rating30 seconds
    Rotation directionCounterclockwise as viewed from drive end
    IMA MOTORTypeDC brushless-3phases
    Output100 V
    CVTTypeElectronically-controlled continuously variable transmission, multi plates wet sump, hydraulic
    Primary reductionDirect 1:1
    Gear ratioLow-High2.526-0.421
    Final reductionTypeSingle helical gear
    Gear ratio4.200
    STEERINGTypeElectrical power-assisted rack and pinion
    Overall ratio16.09
    Turns, lock-to-lock3.29
    Steering wheel diameter370 mm (14.57 in)
    SUSPENSIONTypeFrontIndependent strut with stabilizer, coil spring
    RearTorsion beam, coil spring
    Shock absorberFront and rearTelescopic, hydraulic, nitrogen gas-filled
    TYRESSizeSee tyre information label attached to the doorjambs
    BRAKESType of service brakeFrontPower-assisted self-adjusting ventilated disc
    Rear (disc)Power-assisted self-adjusting solid disc
    Rear (drum)Power-assisted self-adjusting solid drum
    Type of parking brakeMechanical actuating, rear wheels
    AIR CONDITIONINGCompressorTypeScroll
    Capacity77.1 mL (4.7 cu in)/rev.
    Maximum speed10,000 min -1 (rpm)
    Lubricant capacity80-90 mL (2 2/3-3 fl・oz, 2.82-3.17 Imp・oz)
    Lubricant typeSP-10
    CondenserTypeCorrugated fin
    EvaporatorTypeCorrugated fin
    BlowerTypeStabilized swirling flow
    Motor inputRHD model : 220W/12 V
    LHD model : 170W/12 V
    Speed controlInfinitely variable
    Maximum capacity400 m 3 (14,126 cu ft)/h
    Temperature controlAir-mix type
    Compressor clutchTypeDry, single plate, Poly V-belt drive
    Electrical power consumption at 20 °C (68 °F)42 W maximum at 12 V
    RefrigerantTypeHFC-134a (R-134a)
    Capacity370-420 g (13.1-14.8 oz)
    ELECTRICAL RATINGSBattery12 V-35 Ah/20 HR (12 V-28 Ah/5 HR)
    FusesBattery terminal fuse box100 A, 60 A, 20 A
    Under-dash fuse/relay box50 A, 40 A, 30 A, 20 A, 15 A, 10 A, 7.5 A
    Auxiliary under-dash fuse holder15A
    Light bulbsHeadlight high beam12 V-60 W
    Headlight low beam12 V-55 W
    Front turn signal lights12 V-21 W
    Side turn signal lights (Mirror type)LED
    Side turn signal lights (Fender type)12 V-5 W
    Front position lights12 V-5 W
    Front fog lights12 V-55 W
    Rear turn signal lights12 V-21 W
    Rear fog light12 V-21 W
    High mount brake lightLED
    Back-up lights12 V-16 W
    License plate lights12 V-5 W
    Ceiling lights12 V-8 W
    Cargo area light12 V-5 W
    Individual map lights12 V-8 W
    Console box light14 V-1.4 W
    Gauge lightsLED
    Indicator lightsLED

    Body1HKGP1.PNG Body2HKGP1.PNG